Multi Layer Dryer 5000pcs / H 5*8 Egg Tray Making Machine

5*8 Egg Tray Making Machine --- An Eco-friendly Way to Recycle Waste Paper

The 5*8 production line is a fully automatic egg tray production line, including pulping, forming, drying and packaging. There are two design schemes for our drying method, one is multi-layer metal drying, and the other is traditional brick drying. Customers can choose different drying methods according to their needs.

Othe types of Egg Tray Prodution line 

- manual (producing between one thousand and 1,500 pieces each hour)

- semi-automatic (producing 2,000 – 5,000 pieces per hour)

- automatic (producing 5,000 – 7,500 pieces each hour).

Egg Tray Making Machine woking process

1. Pulping system

(1) Put the raw materials into the pulp machine, add appropriate amount of water and stir for a long time to turn the waste paper into pulp, then put it into the storage tank for storage.

(2) Put the pulp in the pulp storage tank into the pulp mixing tank, adjust the pulp concentration in the pulp mixing tank, pass the white water in the return tank and the thick pulp in the pulp storage tank through the homogenizer to further stir. After being adjusted to suitable pulp, it is put into the supply tank to be used in the forming system.

Equipment used: pulper, homogenizer, pulp pump, vibrating screen, pulp disintegrator

2. Molding system

(1) The pulp in the feed tank is fed into the forming machine, adsorbed by the vacuum system, and the pulp is left on the mold through the mold on the equipment to form, and the white water is sucked and driven back to the tank through the vacuum pump.

(2) After the mold is adsorbed, the transfer mold passes through the positive pressure of the air compressor to blow out air, and the molded product is blown from the mold to the transfer mold, and the transfer mold is sent out.

Use equipment: molding machine, mold, vacuum pump, negative pressure tank, pump, air compressor, mold cleaning machine

3. Drying system

(1) Natural drying method: The product is dried directly by weather and natural wind.

(2) Traditional drying: brick tunnel kiln, the heat source can choose natural gas, diesel, coal, dry wood,

LPG and other heat sources.

(3) New multi-layer drying line: 6-layer metal drying line can save energy by more than 30% compared with transmission drying. The main heat source is natural gas, diesel, liquefied petroleum gas, methanol and other clean energy sources.

(4) Auxiliary packaging for finished products

  Automatic stacking machine

  Baler

  Transfer conveyor

Advantages of Hoden egg tray machine 

Equipment advantages: It can produce various paper products with a height of less than 15 cm, and it is convenient to debug and change the mold quickly.