3 Molds Paper 1200pcs/H Pulp Molding Machine For Home Farm

Small Paper Pulp Molding Egg Tray Making Machine for Home Farm Using

Specification of HOLDEN MACHINERY F1000 egg tray molding machine

Machine Capcity: 1000 pcs/h 

Mold: 3 pcs egg tray forming molds + 3 pcs egg tray transferring molds 

Remark: the molds can be customized as buyers' egg tray samples. 

Operation speed: 5-7 times/min 

Remark: the speed of the egg tray machine can by adjusted. 

Machine Motor: 2.2 kw 

Voltage: 380V/50HZ 3 phase 

Remark: the voltage can be customzied as customers' local requested. 

Rated Semi Automatic Egg Tray Machine in HOLDEN MACHINERY 

Uasage of small egg tray making machine

1. Usually, semi automatic egg tray machine is small capacity egg tray making machine, it is suitable for small quantity demand produding, and the finished egg trays will be set on the ground directly in the sun, take about 4-5 hour for natural drying.

2. Small capacity egg tray machine is suitable for home use or start new business. It usually with natural drying(Drying in the sun), no energy cost, low investment, operate easily and more safe than old reciprocating type machine.Small egg tray machine suitable for produce different kind of paper trays, especially special paper pulp trays, such as industrial packaging products, electrical products packages etc.

3. The egg tray molding machine speed can be adjusted to be slower or faster as buyers’ request, and the molds can be customized as buyers’ egg tray samples, and the egg tray production line without dryer can be re-matched with dryer in future if need.

Introduction of EGG TRAY MACHINE 

Egg tray equipment is a kind of paper tray equipment belonging to pulp molding equipment.

The production of this paper tray equipment belongs to the environmental protection industry.

Because the egg tray is more environmentally friendly, it can also recycle waste paper.

It is recognized and very good promotion in our country.

Main Features of paper egg tray machine

1. The production technology of pulp molding technology has developed rapidly.

2. The basic process is four steps, pulp preparation, molding, drying, and shaping.

3. Domestically, it is mainly semi-automatic equipment, while almost all abroad are fully automatic high energy consumption pipelines;
4. Egg tray equipment can be divided into three ways, flip type, rotary type and reciprocating type.

5. The pulp molding molding machine adopts a flip type suitable for medium batch and non-standard production of industrial molding.

6. The production cycle is relatively long and the mold investment is large.

7. Drum packaging is suitable for the production of large-scale shaped products.

8. Reciprocating is suitable for non-standard, small batch and fast cycle industrial packaging products.

Technology of Egg Tray Making Machine

Pulp molded products are new packaging materials that have been rapidly developed in recent years, and are excellent substitutes for wood.

Pulp molding products use: raw materials pulping-ingredients-compression molding-drying-shaping manufacturing process.

After the molding, a large amount of moisture (about 55-60%) remains on the workpiece, and the moisture content of the final product is 12-14%. Therefore, during the drying process of the workpiece, the moisture that accounts for the general weight of the workpiece is removed. This part of the water must be removed by absorbing heat into water vapor.

Due to the phase change in the drying process, the energy consumption is very large, and the pulp molded products are processed into high energy consumption products.

For this reason, it is necessary to perform a thermal analysis on the energy conversion process of the drying.

Because the analysis can improve the design and processing of the drying equipment, improve the energy utilization rate, and have a very important guiding significance for reducing the production cost of the pulp molding products industry.

Principle of paper pulp egg tray machine

Waste paper is used as a raw material, and then pulped and crushed to make raw materials, and then the final paper and plastic products are produced through molding, drying, and shaping processes.

Egg tray equipment Processing

Egg tray equipment, its production line is mainly divided into beating system, forming system, drying system, waste water recovery system. At present, some egg tray equipment is added to the automatic barrier stacking system. The automatic barrier stacking system makes the paper tray equipment more automated, which saves manpower and time for the egg tray production line. The waste water recovery system is in response to the country's call for environmental protection requirements, preventing the discharge of waste water everywhere and reducing environmental pollution.
1. Pulp molding equipment-the beat process of egg tray equipment, raw waste paper scraps are put into the pulper, and then water and other raw materials are added to break it into a pulp. In fact, it is the recycling of those waste paper scraps.
2. Egg tray forming machine is referred to as egg tray machine. It is made from different molds on the host machine. Of course, it is also possible to change the grinding tools to produce wine trays and shoe trays. This is the molding process of the pulp molding equipment.
3. The pulp molding equipment starts the drying process of the newly formed egg trays, and ensures that the egg trays can be dried in a short time through the three-dimensional hot air. The hot air removes the moisture from them and the egg trays are produced.

Service for egg tray making machine

Pre-sales service of paper egg tray making equipment
1. Design efficient and suitable paper tray production line according to customer needs.
2. According to the customer's plant situation, design the layout of the factory building and arrange the location of the paper support equipment reasonably.
3. On-site installation and commissioning of paper tray production line to guide and train employees. Respond to machine issues within 24 hours.

After-sales service of paper tray equipment
1. Except for wearing parts, the entire set of paper tray equipment is guaranteed for one year. On-site service is provided during the warranty period, and the problem is resolved within 72 hours of machine failure.
2. Paper tray equipment manufacturers establish customer file information and perform regular maintenance.
3. Provide 24-hour telephone and email technical support to solve difficult problems one-on-one.

As a professional manufacturer of pulp molding equipment, it has an on-site egg tray production line for you to study and research, providing you with the most mature egg tray production technology, and 24-hour online after-sales service to solve your worries.