5000pcs/H Waste Paper Pulp Molding 95kw Egg Tray Equipment

5000 Pcs/H waste paper pulp Molding Egg Tray equipment

1.5000 pcs per hour egg tray equipment description

HY-5-8 Egg tray making machine with metal dryer has 8 faces rotary structure, 40pcs forming moulds and 5pcs transferring moulds, can produce egg tray 5000pcs per hour. 

The major equipment of the machine are include 3 parts:

Pulp system , forming system , Drying system.

Pulp Moulding Machine, which uses waste paper, cardboard, leftover material of paper mill, by hydraulic pulper, mix making a certain dense pulp, and pulp is absorbed by vacuum of special metal moulding to become wet products, through drying , and shaping to become finished products.

Egg tray making machine is a kind of environmental protection equipment. It can make egg box, paper egg tay, fruit tray,industrial tray and so on.

The material is waste paper, which can help you save cost. We own vast experience in this line and will not let you down. Hope that we can be good partners later.

2.Ours Service

Pre-sale service
* Reply within 24 hours by phone or email.
*As required, we will design low cost, low consumption, high efficient egg tray production line.
* Free design for production plant.
*Finish the machine within 25 working days after get the 30% deposit, deliver within 5 days after get 70% balance.

After-sale service
* When the machine arrived the destination, as the time require to install, we will send the engineer within 1 month.
*The engineer is responsible for installing the production line, and training the worker freely.
* Within 1 year warranty period, except the quick-wear parts, If there is any problems with the machines , we will free repair ( we will pay the engineer ticket and salary).
* After 1 year warranty period, as require, we will free repair. The air ticket is paid by buyer.
* lifelong technical support service.

3.5000 pcs per hour egg tray equipment components

Pulping system
(1) Put the raw material into the pulper and add an appropriate amount of water for a long time to stir the waste paper into pulp and store it in the storage tank.
(2) Put the pulp in the slurry tank into the pulping tank, adjust the pulp concentration in the pulping tank, and further stir through the homogenizer through the white water of the return pool and the thick slurry of the storage tank. After adjusting to the applicable pulp, put it into the feeding pool to be used in the molding system.
Equipment used: pulping machine, homogenizer, slurry pump, vibrating screen, pulp disintegrator

Forming system
(1) The pulp in the supply tank is supplied into the molding machine, and is adsorbed by the vacuum system, and the pulp is left on the mold by the mold on the equipment to be formed, and the white water is sucked and transported back into the pool through the vacuum pump.
(2) After the mold is adsorbed, the transfer mold is blown out by the positive pressure of the air compressor, and the molded product is blown from the molding die to the rotary mold, and is sent out by the transfer mold.
Equipment used: molding machine, mold, vacuum pump, vacuum tank, pump, air compressor, mold cleaning machine

Drying system
(1) Natural drying method: The product is dried directly by weather and natural wind.
(2) Traditional drying: brick tunnel kiln, heat source can choose natural gas, diesel, coal, dry wood,A heat source such as liquefied petroleum gas.
(3) New multi-layer drying line: 6-layer metal drying line can save more than 30% energy compared to transmission drying. The main heat source is clean energy such as natural gas, diesel oil, liquefied petroleum gas and methanol.
Finished product auxiliary packaging

(1) Automatic stacking machine
(2) Baler
(3) Transfer conveyor

4. 5-8 Egg tray equipment with metal dryer

1.The production line is high production capacity and easy to install and operate.because we are the facotry,so we have competive price and best pre-sale, in-sale and after-sale service.

2.We can respond quickly to any customer problems.and the full production line is Stable final product quality(Good&strong look, same weight and size) and space saving & low investment.