Integrated Paper Pulp Molding 1200pcs Egg Tray Equipment

Integrated Paper Pulp Molding Automatic Egg Tray Making Machine

Brief Introduction of Integrated Paper Pulp Molding Automatic Egg Tray Making Machine

We produce different type paper pulp tray making machine ( also known as egg tray machine, or paper tray forming machine ) , turning templates mini egg tray making machine,traditional reciprocating small egg tray forming machine , automatic rotary drum egg tray making machine, etc; For our rotary egg tray making machine, it is developed as Germany technology, and we improved the motors, driving system to get higher production capacity but more energy saving; Depending on the heat drying system can be divided into : fuel drying , gas drying , steam drying , oil drying, electric stove heating and drying and drying , which can meet the needs of different investors.

Characteristics of Integrated Paper Pulp Molding Automatic Egg Tray Making Machine

Low investment, fast return.

Save energy and manpower.
Easy to operate, stable and reliable performance, high quality.
Paper egg tray machine can produce different products with different dies,such as egg tray moulds, egg box/carton moulds, fruit tray moulds,seeding tray moulds,industrial moulds etc.
You can customize the paper egg tray machine according to your own needs.

Technical Data of Integrated Paper Pulp Molding Automatic Egg Tray Making Machine

Voltage 220/380V or according to your request
Motor Power 2.2kw
Template size 1.47*0.47m
Operating speed 10 times/minutes
Overall Dimension 3.1*1.7*1.8m

Egg tray making machine advangage:

1. Simple and useful production technology. The workers can master and apply the production technology and skill after a short period of training. Meanwhile, the high localization degree of pulp molding equipment is easy for popularizing the paper and pulp industry.
2. Wide source and low cost of raw materials: in our life, there are a large amount of waste paper. You can get waster paper easily. The cost of waste paper is low.
3. Good plasticity and high cushion performance. Pulp molded products can prevent the eggs from collision.
4. Light weight, low recycle cost, reusability, good protectiveness, high interchangeability.
5. Environmental friendly: from the production and use to waste dispose, there is no pollution.
6. High air permeability: it is good for packaging the fresh product.
7. Convenient transportation: paper egg trays have small volume and can be overlapped. Therefore, they are easy for transporting.

Integrated Paper Pulp Molding Automatic Egg Tray Making Machine Work flow

The complete egg tray plant includes basically 3 sections: pulping section, molding section and drying section. Some assistant equipments are required as well such as air compressor, vacuum pumps, hot pressing machine, burners, etc.

The pulping section:

· Feed clean water into hydraulic pulper to it's 60%~70% level, scale proper weight of waste paper and load inside the hydra pulper. Color dyes can be added as well simultaneously.

· The waste paper pulp stays 20~40 minutes inside the pulper, depending on paper fibre, and then pumped into vibrating screener. Water is added during the screening for pulp dilution. The impurities such as nails, metal pieces, plastic films, etc will be removed.

· The pulp goes to NO.1 pool before entering pulp miller where it will be refined into average consistency. After grinding, the pulp goes to NO.2 pool before entering the egg tray molding machine.

· Another NO.3 pool can be built as well as stand by pools, or for extra pulps. Chemicals to be added include aluminum sulfate and other water proof agents.

The molding section:

· Start the rotary egg tray molding machine and pump the pulp inside, the extra pulp will flow back to pool NO.1 automatically.

· Turn on vacuum pump for vacuum production. Water for vacuum pump operation should be clean and circulated. The water separated by the vacuum pump from the molding machine will flow to the pulp pool for another circulation.

· For each stroke of egg tray molding, water will be sprayed out from the nozzles to clean the molds. It's a very important unit which not only cleans the mold but also removes extra burrs on the egg tray, making sure the egg tray produced has a smooth edge.

The drying section:

With each stroke of egg tray molding, the transfer arm move the wet trays into the chain converyor which will enter the drying tunnel for the removal of moist. There are two types of drying oven, multi-layer type and single layer type.

Our service of egg tray machine

1. We have our own factory that can provide professional design and stability product quality, and also we can offer the most reasonable prices.
2. We have Trade Assurance .
3. We can send the machine about 20 days .
4. We have our own professional sales teams who have rich experiences on the international trade and good technical knowledges.
5. we can offer the the services install the machines to your country after the machines were ordered .
6. If the machines have any problems ,we will offer the parts and the tools for the repairment for free witin 1 year.and our the warranty is 1 year.